Manticore Arms X95 Upgrade Package – Includes Slim Luma Safety, Gasketed Port Cover, Curved Buttpad & Cantilever Forend | Fits IWI X95 Rifle

Package deal that includes four different Manticore Arms upgraded parts for the IWI X95 rifle. Includes Slim Luma Safety, Gasketed Port Cover, Curved Buttpad & Cantilever Forend

LUMA Safety lever (slim)

The LUMA safety (Lever, Upgraded Metal Ambidextrous) is a direct drop in metal safety upgrade that will work on both the left and right side of the gun. Made of 6061 aluminum and finished in black anodizing, the LUMA safety is made right here in the USA.  The included slim safetly lever is recommended to be installed on the offhand side. 

LUMA SLIM – a low profile version that keeps out of the way and won’t irritate or rub your hand while in the “FIRE” position as the original polymer safety has been known to do, but that still allows for easy manipulation of the safety. Perfect for the offhand safety.

Gasketed Port Cover

The Tavor Gasketed Port Cover uses the proper solution to sealing off gas from the closed off ejection port- a gasket!  An inner and outer panel are pulled together by two screws and the gasket is sandwiched and compressed between the two, thus giving a comopressed seal against any gas flow coming out of the covered ejection port.

Even better, the Gaskted Port Cover is ambidextrous, meaning it can be used on either ejection port, and also has an integral QD sling swivel pocket.  The Gasketed Port Cover is made of 6061 anodized aluminum, rubber for the gasket, and is completely made in the USA. Includes all hardware and tools necessary for installation.

Curved Buttpad for X95

The X95 Curved Buttpad allows you to shave over an inch of length of pull of your rifle without dropping into NFA territory!

Similar to our Tavor Curved Buttpad, the X95 Curved Buttpad features an aluminum skeleton structure with an overmolded rubber pad.  The rubber pad is curved to conform to your shoulder and not only give better ergonomics and grip but also shortens the overall length of pull on the rifle.  By keeping the top edge the same length as the OEM buttpad the rifle does not drop under 26″ inches in length, which if shorter than that would make it an NFA Short Barreled Rifle.

The X95 curved buttpad is made by Manticore Arms in the USA.

X95 Cantilever Forend

Manticore Arms breaks new ground in the industry again- say hello to the first  X95 Tavor forend upgrade out there!

The new Patent Pending  X95 Cantilever Forend offers a wealth of features at an incredible price.  To solve some of the inherent issues of how to securely mount a forend to the X95 without contacting the barrel we had to think outside the box, and the solution was a two part system.

The first component consists of a 39 slot picatinny top rail and cover plate assembly that is raised to the proper height to work with standard AR-15 iron sights and optics (i.e. most all sighting components on the market these days).  In addition the top rail is cut for the 300 blackout gas adjustment access in case you are mounting on a 300 Blackout X95.

The second component is the forend itself which is 2″ longer than the OEM forend, features 3 rows of M-LOK (13 slots) on each side plus 2 QD points on each side,  and  5 slots of M-LOK on the underside.  The center row of M-LOK on the sides and the underside row on M-LOK is centered on the bore line making it much easier to zero lasers and other items that are bore line sensitive.   The top of the forend features two L-shaped tabs that engage matching slots on the top rail.  To install the forend portion just slide the forend into the slots on the top rail along the axis of the barrel, make sure the alignment tab on the underside engages the opening in the receiver,  tighten the cross bolt screw and you are ready to go with a rock solid mounted forend.  This along-the-bore-axis installation allows one other benefit- you can install a suppressor up to 1.5″ in diameter on the barrel and can slide the forend on and off without need to remove the suppressor!

Ah, but it is the little details that count.  Not wanting to leave an opening where the lower plastic tab of the OEM forend engages, we have included a polymer filler block that blends perfectly with the receiver to keep everything closed up and tidy.

One last benefit- with X95 Cantilever forend YOUR BARREL IS NOW FREE FLOATED.  No more contact of the barrel as you had with the OEM polymer forend and its two barrel mounted polymer support points, as the X95 Cantilever Forend is completely supported by the top rail and the receiver.

Total weight of the system is 1 lb 7.4 ounces compared to the OEM 1 lb 2.5 ounces.  Only 3.9 ounces more than the OEM forend at a gain of all aluminum construction, the ability to sleeve a suppressor, a longer and higher and more useful top rail, and almost 2″ of additonal forend with a slimmer profile plus M-LOK compatibility and integral QD points.  Not a bad deal for 3.9 extra ounces, is it?  

The X95 Cantilever Forend  is Patent Pending, and manufactured of 6061 black milspec hardcoated aluminum (plus a polymer filler block) 100% right here in the USA.

Please note, Manticore Arms, Inc. will vigorously enforce its patent rights on this groundbreaking product- future potential copycats beware!