The KP-15 is an AR15 style receiver made from injection molded glass filled nylon incorporating the buttstock, buffer tube, pistol grip, and trigger into the receiver design as integral components.
The KP-15 Receiver draws inspiration and experience from earlier monolithic polymer receiver designs while incorporating modern manufacturing techniques and features for the current marketplace.
This manufacturing process offers several advantages
- Lighter weight compared to similarly configured receivers
- Lower cost to similarly configured receivers
- Increased production speed and elimination of sub components through integration; especially important during high demand cycles in the market.
Features Include:
- Compatibility with most common AR15 uppers and lower parts kits
- Flared magwell to make reloads under stress easier to perform.
- A1 Length 13 Length of Pull (LOP) Buttstock to fit a wide range of shooters
- MLOK Slots at rear of stock for sling attachement points or run a strap through it for simple sling attachment
- Holes at the front of the stock for QD socket inserts for more sling attachment options
- Improved grip for comfortable use
- Winter Trigger Guard
Technical Information
- The KP-15 receiver uses a Carbine buffer and spring
- The Take Down and Pivot Pins have the detents built into them; eliminating the spring and detent holes in the lower increases durability.
- The Selector spring and detent load from the top, then the selector slides over it.
- The buffer detent (should you choose to use it) is held in place with a 5/64 Roll Pin
- The KP-15 is compatible with all Mil-Spec Fire Control Groups
- The KP-15 is compatible with cassette style match triggers included the KE Arms DMR and SLT units. The retention system of these triggers with D-Clips in the bushings to retain the fire control pins makes them better suited for use in the KP-15 than other designs that require captured pins.
- The hammer pin area is wider for durability; Standard AR15 hammer pins can still be used but we offer a longer hammer pin for customers preferring a flush pin for aesthetic reasons
SKU | KE-1-61-01-001 |
---|---|
MPN | 1-61-01-001 |
Manufacturer | KE Arms |
Model | KP-15 Polymer Compete AR15 Lower Receiver |
Condition | New |
Configuration | Stripped |
Lower Type | AR15 |
Mag Pattern | AR15 |
Material | Polymer |
MFG Process | Injection Molded Glass Filled Nylon |
Trigger Guard | Integral |
Buttstock | Polymer |
Allocation Points | 249 |